Multilingual wiki (single wiki)


A wiki can be set up to include different language versions for wiki pages. Wiki administrators have to make some decisions regarding how they want to support each wiki user's language setting in addition to simply providing translated content.

The following considerations refer to a single-wiki scenario and don't apply if the language versions are maintained in multiple wikis.

Concepts

To make a single wiki multilingual, some basic steps are necessary:

  • Import a language switcher
  • Create wiki pages with linked translation subpages


In addition, depending on your wiki setup, further aspects can and should be considered:

  • Create page lists for each language with different filter settings
  • Create portal pages based on user language
  • Create template and form labels based on user language
  • Create a multilingual category system
  • Create multilingual navigation links

A note about MediaWiki translation extensions

The following information gives you some suggestions for organising a wiki around its multilingual content based on the previously mentioned aspects. It does not consider using MediaWiki extensions like Translate or the MW Language Extension Bundle which can be installed in multlingual wikis to faciliate a section-by-section translation of wiki pages.

If most of your wiki content needs consistently accurate translations, these extensions can be valuable. Such a focus on translation, however, requires an understanding of how this mechanism technically works and might hinder the spontaneous contribution to the wiki by a broad user base. In addition, these extensions are not bundled with BlueSpice and require additional administrative effort during wiki updates or upgrades.

Here, we look at mechanisms that support multilingual content in an easy way. All that is necessary, in addition to using already built-in mechanisms, is importing a language switcher template which provides the necessary information to easily change between different languages. This template also tracks the language versions of a page in a way that makes it easy to create targeted overview pages for users with different language backgrounds.

Importing the language switcher

To show that a page has different versions, it is useful to indicate this with a language switcher on each page. If you have no language switcher in your wiki, you can download a language switcher template. The techniques shown in the following sections assume that this particular language switcher is installed.

Be sure to read the configuration instructions on the downloads page. You need to define the languages that you want to support in your wiki in the template itself.

language switcher on a wiki page
language switcher on a wiki page

Creating wiki pages with translated subpages

Let's take a page called Vacation policy in a wiki with English as its content language wiki and create a German language version.

Note:When translating in a single wiki, it is important to know the content language of the wiki. It is the language in which the wiki has been installed. To find it out, you can add the magic word {{CONTENTLANGUAGE}} to the source view of any wiki page and save it. The page will then display the language code.


To create a language version for the main language (=content language), a subpage with the ISO-639 language code as subpage name is created. This means that for the page Vacation policy, you need to create the subpage Vacation policy/de.

As you can see in the screenshots below, the page content is always shown in the context of the user language preferences of each user. This means that the user interface elements do not necessarily correspond to the translated language. But since the user decided to use this language setting, it does not negatively affect this user, but actually supports them when navigating the wiki.

Adding the language switcher to a page

Now that we have two language versions, we want to connect them with the language switcher. To add the language switcher to a page:

  1. Open the page in edit mode.
  2. Insert the template Languages form the editor toolbar.
  3. Enter a display title for the page (recommended for subpages).
    Setting the display title
    Setting the display title
    The search engine will index this display title so that the title search returns the expected result.
  4. Save the page.
  5. Repeat steps 1-4 with other language subpages (e.g, fr, nl).


The language switcher in the right corner of the page now shows what other languages are already available.

Language switcher shows all available translations
The language switcher shows all available translations

Creating page lists for different languages

Over time, a wiki can have lots of these translated pages. We want to make sure that users know what pages are available in what language. For this purpose, the language switcher template includes a custom property Languages/tracklang that allows to easily create filtered page lists for this purpose.

In BlueSpice pro, you can include different inline queries on any wiki page. This example lists German language pages in the main namespace and displays them in a category-type output (A-Z listing):

{{#ask:
[[:+]][[Languages/tracklang::de]]
|format=category
}}
Results format "category"
Results format "category"

Explanation of the arguments for this query:

  • [[:+]]: Returns pages only in the main namespace. To show the pages form the entire wiki, simply delete this argument. Other options:
    • [[QM::+]]: Returns pages from the namespace QM
    • [[QM:+||Help:+]]: Returns pages from the namespaces QM and Help.
  • [[Languages/tracklang::de]]: Returns only pages that are marked by the language switcher template as German language pages. Other options:
    • [[Languages/tracklang::+]]: Returns all language pages that are tracked in the wiki by the language switcher template.
    • [[Languages/tracklang::!de]]: Returns all language pages except German pages.
    • [[Languages/tracklang::de||fr]]: Returns all language pages in German and French (in the example above restricted to the main namespace.
  • format=category: returns a category style output.
    • format=ul: returns a list style output
Results format "ul"
Results format "ul"


To see more examples for defining and further modifying a query, go to our SMW-query examples page.

Note:Working with properties requires the Semantic MediaWiki extensions, which are bundled in BlueSpice pro, but not in BlueSpice free. There are, however, alternative approaches for creating page lists in BlueSpice free.


Creating portal pages based on user language settings

Portal pages are pages that serve as entry points to different topics or areas in the portal, often considering the needs of specific user groups. A typical example is the main page of the wiki, which should give users a high-level orientation in the wiki. A portal page is a good place to take the language needs of different users into account.

Here, we can take two different approaches:

  1. Show the same page to all users, but include some content that targets specific user languages.
  2. Show completely separate content to users based on their user language.

What is the user language?

Wiki users can change their own language setting in the user preferences:

User language preference
User language preference

Depending on this setting, users then see the user interface elements in that language as we have seen in previous screenshots. This applies to interface elements that already have translated system messages.

To provide additional support for this setting, we can include checks on wiki pages that determine the user language and serve up additional or alternative information as needed.

Preparing the user language check

Checking for the user language requires that we create a system message for this purpose. This is easy to do, but needs to be done by users in the role admin or structuremanager.

To create a system message for the user language:

  1. Create the page MediaWiki:lang with the content being the language code of the content language of your wiki. If you are not sure in what language your wiki was installed, you can add the magic word {{CONTENTLANGUAGE}} to the source of any wiki page and look at its output. If you have an English wiki, you need to add "en" as the content to this page. If your wiki is German, add "de" instead.
    Page MediaWiki:Lang
    Page MediaWiki:Lang
  2. Create subpages to this page for the user languages you want to support. For example in an English wiki:
    • MediaWiki:Lang/de
    • MediaWiki:Lang/fr

Now we have a mechanism to detect the user language. By checking for the value of the "magic word" {{int:lang}} , we can use it in many different scenarios.

Displaying additional content

To show content on a page only to users with a specific language setting — for example, German — we can add the following check:

{{#ifeq: {{int:lang}}|de|show this content|}}

Switching to different page content

To show entirely different content to users with different language settings, you can prepare different pages and then serve them up as needed. As an example we take the homepage of the wiki.

To display different homepage content based on user language in an English wiki, where the homepage is called Main Page:

  1. Create a subpage for each language you want to support, e.g.
    1. Main Page/en
    2. Main Page/de
    3. Main Page/fr
  2. On the page Main Page, add the following switch:
    {{#switch: {{int:lang}}|de={{:Main Page/de}}|fr={{:Main Page/fr}}|{{:Main Page/en}} }}
    
    Users with language setting "de" will see the content of page Main Page/de, users with "fr" language setting the page Main Page/fr, all other users get the page Main Page/en.

Switching labels

To show different labels or short text snippets directly on a page, we can also use the switch function:

{{#switch:{{int:lang}}|de=Überschrift 2|en=Heading 2}}

To summarize, the following main page can be accomplished in two different ways:

  1. By creating separate subpages for each user language and then transcluding them with a user language check on the actual Main Page.
  2. By loading the actual Main Page and then building the language checks into the page itself. The following picture shows examples of:
    • (1), (2) Switching headings
    • (3) Displaying query results based on the tracked language from the language switcher template (e.g., [[Languages/tracklang::en]])
    • (4) Switching display labels in templates (this can also be applied to page forms)
    • (5) Switching image captions
Content based on user language settings
Content based on user language settings

Switching template and form labels

As the previous screenshot shows, labels in templates (and forms) can also be shown based on user language. You can simply add the switch function directly in the template. The template Template:Contactinfo collects street, zip and city info:

{| class="wikitable"
! {{#switch:{{int:lang}}|en=Street|de=Straße}}
| {{{street|}}}
|-
! {{#switch:{{int:lang}}|en=Zip|de=PLZ}}
| {{{zip|}}}
|-
! {{#switch:{{int:lang}}|en=City|de=Stadt}}
| {{{city|}}}
|}

It displays the different labels as needed:

Multilingual navigation

Currently, there is no easy mechanism to create multilingual navigation menus, such as the main navigation or the custom menu. More support should be coming in one of the next minor releases of BlueSpice (4.2 or 4.3). In the meantime, you can create individual links based on a user's language settings.

Searching content by language

Limiting search results by language
Limiting search results by language
Filtering pages by language
Filtering pages by language

Multilingual categories

An important aspect of organizing content is a well-designed category system for your wiki. By tagging your content, you support both the search functionality and the possibility of creating context-based page lists in all kinds of variations.

To keep an overview of which categories are available translated in different languages and which categories are simply shared by different languages, you can use a prefix mechanism that allows to associate categories by language.

For example, for the category Application, you would use (in an English wiki) the English category APP Application and the German category APPde Anwendung. Both categories could share the category APP SAP.

Multilingual category tree
Multilingual category tree


Whether you even need the separate category APPde Anwendung depends simply on the language proficiencies of your users. You don't need to create a language variation of a category just for finding, for example, all German pages that are related to the concept of "Applications", since the language switcher mechanism already collects this information for you (both in BlueSpice free and in BlueSpice pro).

Tip:It makes sense to create as many language versions of categories as necessary, but as few categories as possible. To determine if you need a language variation, ask yourself:
  • Who needs this category for what purpose?
  • Is there already a different mechanism (e.g. a SMW-property, an automatically assigned category, the subpage syntax) that can be used to later "collect" pages based on different commonalities.


Creating a root category first

It is also a good idea, to start your category system with a single root category:

Starting with a root category
Starting with a root category


This allows you to later manage your category system without entangling it with other unrelated categories that might be created by users. Besides your category system, other types of categories might coexist:

Sharing subcategories

If you want to use a category as a subcategory of multiple categories, be aware of the following facts:

  • Subcategory with multiple parent categories: If you have already assigned a subcategory to a category using the Category manager, there is no mechanism to assign it a second time. You have to do the assignment manually directly on the category page. For example, to use the category APP SAP as a subcategory of both the category APP Application and APPde Anwendung:
    Subcategory of multiple parent categories
    Subcategory of multiple parent categories
    The category manager then shows the category APP SAP listed under both parent categories:
    Shared subcategory
    Shared subcategory
    If you delete a shared subcategory from the category manager, it will be deleted from all its parent categories and from all the pages that are assigned to this subcategory.


Mulitlingual content in BlueSpice free



To submit feedback about this documentation, visit our community forum.

Discussions